Benutzer-Werkzeuge

Webseiten-Werkzeuge

A PCRE internal error occured. This might be caused by a faulty plugin

os4_bsd_freebsd_makeconf

makeconf BACK .. Ein Beispiel der /etc/make.conf in FreeBSD 4.6.2 #------------------------------------------------------------------------------ # # $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.67 2002/06/02 16:07:01 matusita Exp $ # # NOTE: Please would any committer updating this file also update the # make.conf(5) manual page, if necessary, which is located in # src/share/man/man5/make.conf.5. # # This file, if present, will be read by make (see /usr/share/mk/sys.mk). # It allows you to override macro definitions to make without changing # your source tree, or anything the source tree installs. # # This file must be in valid Makefile syntax. # # You have to find the things you can put here in the Makefiles and # documentation of the source tree. # # # The CPUTYPE variable controls which processor should be targetted for # generated code. This controls processor-specific optimizations in # certain code (currently only OpenSSL) as well as modifying the value # of CFLAGS to contain the appropriate optimization directive to gcc. # The automatic setting of CFLAGS may be overridden using the # NO_CPU_CFLAGS variable below. # Currently the following CPU types are recognised: # Intel x86 architecture: # (AMD CPUs) k7 k6-2 k6 k5 # (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 # Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 # # If you experience any problems after setting this flag, please unset # it again before submitting a bug report or attempting to modify code. # It may be that certain types of software will become unstable after being # compiled with processor-specific (or higher - see below) optimization flags. # If in doubt, do not set CPUTYPE or CFLAGS to non-default values. # CPUTYPE=i686 #NO_CPU_CFLAGS= true # Don't add -march= to CFLAGS automatically #NO_CPU_COPTFLAGS=true # Don't add -march= to COPTFLAGS automatically # # CFLAGS controls the compiler settings used when compiling C code. # Note that optimization settings above -O (-O2, ...) are not recommended # or supported for compiling the world or the kernel - please revert any # nonstandard optimization settings to "-O" before submitting bug reports # to the developers. # Note also that at this time the -O2 setting is known to produce BROKEN # CODE on the Alpha platform. # #CFLAGS= -O -pipe # # CXXFLAGS controls the compiler settings used when compiling C++ code. # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" # alone will remove the often needed contents of CFLAGS from CXXFLAGS. # #CXXFLAGS+= -fmemoize-lookups -fsave-memoized # # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested # for use in developing FreeBSD and testing changes. They can be used by # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not # included here due to compiler bugs, eg: mkdir()'s mode_t argument. # BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ -Wcast-qual -Wchar-subscripts -Winline \ -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings # # WARNS_WERROR causes -Werror to be added when WARNS is in effect. # #WARNS_WERROR= yes # # To compile just the kernel with special optimizations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway). # There is very little to gain by using higher optimization levels, and doing # so can cause problems. # #COPTFLAGS= -O -pipe # # Compare before install #INSTALL=install -C # # To enable installing suidperl with the setuid bit turned on #ENABLE_SUIDPERL= true # # To build ppp with normal permissions #PPP_NOSUID= true # # To enable installing ssh(1) with the setuid bit turned on #ENABLE_SUID_SSH= true # # To avoid building various parts of the base system: #NO_CVS= true # do not build CVS #NO_BIND= true # do not build BIND #NO_FORTRAN= true # do not build g77 and related libraries #NO_I4B= true # do not build isdn4bsd package #NO_LPR= true # do not build lpr and related programs #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector #NO_MODULES= true # do not build modules with the kernel #NO_OBJC= true # do not build Objective C support #NO_OPENSSH= true # do not build OpenSSH #NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) #NO_SENDMAIL= true # do not build sendmail and related programs #NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs #NO_TCSH= true # do not build and install /bin/csh (which is tcsh) NO_X= true # do not compile in XWindows support (e.g. doscmd) #NOCRYPT= true # do not build any crypto code NOGAMES= true # do not build games (games/ subdir) #NOINFO= true # do not make or install info files #NOLIBC_R= true # do not build libc_r (re-entrant version of libc) #NOPERL= true # do not build perl. Disables OpenSSL optimizations #NOPROFILE= true # Avoid compiling profiled libraries #NOSECURE= true # do not build crypto code in secure/ subdir #NOSHARE= true # do not go into the share subdir #NOUUCP= true # do not build uucp related programs # # To build the OpenSSL manpages, uncomment the following. These are not # built by default because they clobber a number of system manpages with # manpages describing parts of the OpenSSL toolkit, including passwd(1), # err(3), md5(3), and others. # #WANT_OPENSSL_MANPAGES= true # # To build sys/modules when building the world (our old way of doing things) #MODULES_WITH_WORLD=true # do not build modules when building kernel # # # The following controls building optional IDEA code in libcrypto and # certain ports. Patents are involved - you must not use this unless # you either have a license or fall within patent 'fair use' # provisions. # # *** It is YOUR RESPONSIBILITY to determine if you can use this! *** # # IDEA is patented in the USA and many european countries - thought to # be OK to use for any non-commercial use. This is optional. #MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) # # To avoid running MAKEDEV all on /dev during install: #NO_MAKEDEV= true # # If you do not want unformatted manual pages to be compressed # when they are installed: # #NOMANCOMPRESS= true # # # If you want the "compat" shared libraries installed as part of your normal # builds, uncomment these: # #COMPAT1X= yes #COMPAT20= yes #COMPAT21= yes #COMPAT22= yes #COMPAT3X= yes #COMPAT4X= yes # # # If you do not want additional documentation (some of which are # a few hundred KB's) for ports to be installed: # #NOPORTDOCS= true # # # Default format for system documentation, depends on your printer. # Set this to "ascii" for simple printers or screen # #PRINTERDEVICE= ps # # # How long to wait for a console keypress before booting the default kernel. # This value is approximately in milliseconds. Keypresses are accepted by the # BIOS before booting from disk, making it possible to give custom boot # parameters even when this is set to 0. # #BOOTWAIT=0 #BOOTWAIT=30000 # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. Alter as necessary. # # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 9600. Set the speed to a larger value # for better interactive response. # #BOOT_COMCONSOLE_SPEED= 115200 # # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet # still mount the server's '/' (i.e. rather then load the server's kernel). # #LOADER_TFTP_SUPPORT= YES # # By default, the ports collection attempts to use XFree86 4.X. If # you are running XFree86 3.3.X, uncomment this line. # #XFREE86_VERSION= 3 # # By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. # If you have a XFree86 from before 3.0 that has the X distribution in # /usr/X386, you want to uncomment this. # #X11BASE= /usr/X386 # # # If you have Motif on your system, uncomment this. # #HAVE_MOTIF= yes #MOTIF_STATIC= yes # # If the default location of the Motif library (specified below) is NOT # appropriate for you, uncomment this and change it to the correct value. # If your motif is in ${X11BASE}/lib, you don't need to touch this line. # #MOTIFLIB= -L${X11BASE}/lib -lXm # # # If you're resident in the USA, this will help various ports to determine # whether or not they should attempt to comply with the various U.S. # export regulations on certain types of software which do not apply to # anyone else in the world. # USA_RESIDENT= YES # # # Override "don't install a port that's already installed" behavior. # One might wish to do this for ports debugging or to unconditionally # reinstall a set of suspect/broken ports. # #FORCE_PKG_REGISTER= YES # # # If you're behind a firewall and need FTP or HTTP proxy services for # ports collection fetching to work, the following examples give the # necessary syntax. See the fetch(3) man page for details. # #FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21 #FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80 # # # Port master sites. # # If you want your port fetches to go somewhere else than the default # (specified below) in case the distfile/patchfile was not found, # uncomment this and change it to a location nearest you. (Don't # remove the "/${DIST_SUBDIR}/" part.) # MASTER_SITE_BACKUP?= \ ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ # # If you want your port fetches to check the above site first (before # the MASTER_SITES specified in the port Makefiles), uncomment the # line below. You can also change the right side to point to wherever # you want. # MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} # # Some ports use a special variable to point to a collection of # mirrors of well-known software archives. If you have a mirror close # to you, uncomment any of the following lines and change it to that # address. (Don't remove the "/%SUBDIR%/" part.) # # Note: the right hand sides of the following lines are only for your # information. For a full list of default sites, take a look at # bsd.sites.mk. # #MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ #MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ #MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/ #MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/ #MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ #MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ #MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ #MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ #MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ #MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ #MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ #MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ #MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/ #MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ #MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ #MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ #MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ #MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ #MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ #MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ #MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ #MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ #MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ # # Also it is highly recommended that you configure MASTER_SORT_REGEX # to choose better mirror sites for you. List awk(1)-style regular # expressions separated by space so MASTER_SITES will be sorted in # that order. The following example is for Japanese users; change # "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names # of your nearest/upstream networks to meet your needs. # MASTER_SORT_REGEX?= ^file: ^ftp://ftp\.FreeBSD\.org/pub/FreeBSD/ports/local-distfiles/ ://[^/]*\.de/ ://[^/]*\.de\. # # Ports can place their working directories somewhere other than under # /usr/ports. #WRKDIRPREFIX= /var/tmp # # Kerberos IV # If you want KerberosIV (KTH eBones), define this: # #MAKE_KERBEROS4= yes # # # Kerberos 5 # If you want Kerberos 5 (KTH Heimdal), define this: # #MAKE_KERBEROS5= yes # # Kerberos 5 su (k5su) # If you want to use the k5su utility, define this to have it installed # set-user-ID. #ENABLE_SUID_K5SU= yes # # # Kerberos5 # If you want to install MIT Kerberos5 port somewhere other than /usr/local, # define this (this is also used to tell ssh1 that kerberos is needed): # #KRB5_HOME= /usr/local # # # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution # file(s) you use on your site (see /usr/share/examples/cvsup/README for more # information on CVSup and these files). To use, do "make update" in /usr/src. # SUP_UPDATE= yes # SUP= /usr/local/bin/cvsup SUPFLAGS= -g -L 2 SUPHOST= cvsup.de.FreeBSD.org #SUPFILE= /usr/share/examples/cvsup/stable-supfile #PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile SUPFILE= /etc/stable-supfile PORTSSUPFILE= /etc/ports-supfile # # top(1) uses a hash table for the user names. The size of this hash # can be tuned to match the number of local users. The table size should # be a prime number approximately twice as large as the number of lines in # /etc/passwd. The default number is 20011. # #TOP_TABLE_SIZE= 101 # # Documentation # # The list of languages and encodings to build and install # #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R DOC_LANG= de_DE.ISO8859-15 de_DE.ISO8859-1 en_US.ISO8859-1 # # # sendmail # # The following sets the default m4 configuration file to use at # install time. Use with caution as a make install will overwrite # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now # deprecated. The value should be a fully qualified path name. # #SENDMAIL_MC=/etc/mail/myconfig.mc # # The following sets the default m4 configuration file for mail # submission to use at install time. Use with caution as a make # install will overwrite any existing /etc/mail/submit.cf. The # value should be a fully qualified path name. # #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc # # If you need to build additional .cf files during a make buildworld, # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. # #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc # # Setting the following variable modifies the flags passed to m4 when # building a .cf file from a .mc file. It can be used to enable # features disabled by default. # #SENDMAIL_M4_FLAGS= # # Setting the following variables modifies the build environment for # sendmail and its related utilities. For example, SASL support can be # added with settings such as: # # SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL # SENDMAIL_LDFLAGS=-L/usr/local/lib # SENDMAIL_LDADD=-lsasl # # Note: If you are using Cyrus SASL with other applications which require # access to the sasldb file, you should add the following to your # sendmail.mc file: # # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') # #SENDMAIL_CFLAGS= #SENDMAIL_LDFLAGS= #SENDMAIL_LDADD= #SENDMAIL_DPADD= # # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a # set-user-ID root binary instead of a set-group-ID smmsp binary and will # prevent the installation of /etc/mail/submit.cf. # This is a deprecated mode of operation. See etc/mail/README for more # information. # #SENDMAIL_SET_USER_ID= # # The permissions to use on alias and map databases generated using # /etc/mail/Makefile. Defaults to 0640. # #SENDMAIL_MAP_PERMS= # -- use.perl generated deltas -- # # Created: Wed Sep 4 17:49:27 2002 # Setting to use base perl from ports: PERL_VER=5.6.1 PERL_VERSION=5.6.1 PERL_ARCH=mach NOPERL=yo NO_PERL=yo NO_PERL_WRAPPER=yo #------------------------------------------------------------------------------ # [IMG]

os4_bsd_freebsd_makeconf.txt · Zuletzt geändert: 2016/04/13 00:49 (Externe Bearbeitung)